Thomas Williams, All American Renovations – Elite member of James Hardie™ ALLIANCE · Metro Atlanta and Middle Georgia
At the end of your job somebody walks the house with you and asks you to sign something. That’s the final walkthrough, where the punch list gets made, and most homeowners have no idea what they’re supposed to do with it.
So here’s what it is on our jobs, what you’ll be asked, and what you should have ready — because twenty minutes of preparation changes what you get out of it.
Who Runs It And What Happens
Chris schedules it. He’s the project manager and he’s been the point man on your job the whole way through — who’s actually going to be at my house explains who everybody is.
He walks the finished work with you, you sign the closing documents, and he confirms two things: that you’re satisfied, and whether there’s a punch-out.
And here is the question he’ll ask you, word for word, because it’s printed on our own job schedule:
“Is there anything that needs to be corrected before you sign off on the job?”
That’s not a courtesy and it isn’t rhetorical. It’s a line item somebody has to complete on your job in our own system. When you get asked it, answer it properly.
What A Punch List Is, And What Shouldn’t Be On Yours
A punch list is the small stuff that’s left — and a good punch list is short. A bit of caulk. A piece of trim that needs another look. Something that got missed in the cleanup.
If there is one, Chris schedules the punch-out, gets it walked again, and closes the job. It’s a normal part of finishing, not a sign anything went wrong.
What shouldn’t be on it is the thing you noticed in week two.
I wrote a whole page about that — unhappy with contractor work while it’s happening — and this is the other end of it. Something flagged while the trade is still on site is a fix. The same thing raised for the first time at the walkthrough is a rework: a crew comes back, finished work may have to come off to get at it, and everybody’s schedule moves.
We’ll still do it. But it’s slower, it’s harder, and you waited weeks for no reason. The walkthrough is for what’s left, not for what you’ve been carrying.
How To Walk It Well, Which Takes About Twenty Minutes Of Preparation
Most people walk the front of the house, say it looks great, and sign. Then they find three things over the following fortnight.
Here’s how to not be that person:
- Bring the list you’ve been keeping. If you haven’t been keeping one, walk the house by yourself the day before and make one. You’ll see more alone than you will standing next to somebody waiting for you.
- Do it in daylight, and ideally not at six in the evening. Half the things worth catching are only visible in good light.
- Walk all the way round. The back, the side nobody sees, behind the deck, under the porch. That’s where the things that get missed are, because that’s where nobody has been looking all month.
- Look up. Soffit, fascia, the gable ends. People inspect at eye level.
- And ask about anything you don’t understand rather than only about what looks wrong. A real share of complaints turn out to be about something that’s correct — a deliberate gap, a required clearance — and the walkthrough is the right moment to find that out rather than wondering for a year.
The Cleanup, Because It’s The Thing People Actually Get Angry About
Jobsite cleanup is checked three separate times across the job in our schedule, not once at the end.
That’s deliberate. A site that’s been kept clean all the way through doesn’t need a heroic final tidy, and the stuff that gets left behind — offcuts in the shrubs, nails in the driveway — is easier to find on the day it was made than three weeks later.
Say something at the walkthrough if it isn’t right. It’s the cheapest item on any punch list.
What Happens After You Sign
Somebody from our office follows up with you within twenty-four to forty-eight hours. That’s also on the schedule, and it exists because things occur to people the day after.
And then there’s the long part. Our workmanship warranty is thirty years on siding and ten on roofing — and what matters more than the number is what happens when you call.
You call the office. Caden takes the information, it goes to the project manager, and I get involved. Then we come and investigate.
Here’s the honest timing, and I’d rather publish a real number than a comfortable one: within one to two weeks we’re going to come and investigate the problem. I wish I could tell you I’d be there tomorrow, but that’s not realistic.
Why We Hand You Something At The End
Our project manager runs an eleven-point quality checklist on a siding job — four times, not once at the end. The installers have a copy of it, so they know exactly what they’re being checked on.
And the instruction printed on it is the same thing I say to everybody: walk the job like this was your own home. If it’s wrong, it needs to be fixed.
That sheet is the reason the walkthrough is usually short. By the time you’re standing there with Chris, the work has been checked against a written standard repeatedly by somebody whose job it is. You’re confirming, not inspecting.
But you should still inspect. We’re people, and a checklist run by a person can miss what a homeowner standing in their own yard sees immediately.
What I’d Tell You If You Called Me
- Walk the house alone the day before and write things down. It’s the single highest-value twenty minutes of the whole project.
- Do it in daylight.
- Go all the way round, and look up.
- Answer the question properly when it’s asked. “Is there anything that needs to be corrected?” deserves more than “looks great.”
- Ask about things you don’t understand, not just things that look wrong. Some of what looks wrong is required.
- Don’t treat the walkthrough as your first chance to raise something. It’s your last chance, and the two are very different.
- And ask any contractor what their walkthrough involves before you hire them. If the answer is “we’ll have you sign off at the end,” that’s not a process — that’s a signature.
Want To See The Quality Checklist Before You Hire Anybody?
We’ll give you a copy whether you use us or not. We’re in Hampton, with a design center in Forsyth, and we work across Middle Georgia and Metro Atlanta.
If you want the money side of the end of a job, how much should a contractor ask for up front covers how the draws work.
Everything on this page is our own process, taken off our own job schedule. There’s nothing cited here because there’s nothing to cite.
All American Renovations — (770) 629-0589

Thomas Williams is co-founder of All American Renovations, which he and his brother Pete started as a gutter business in 2001 and have run in Henry County, Georgia, for 25 years. He has installed James Hardie siding since 2007 and writes the company’s Learning Center. All American Renovations is an Elite member of James Hardie™ ALLIANCE, a CertainTeed ShingleMaster and an EPA Lead-Safe Certified Firm. Read Thomas’s full profile or connect with Thomas on LinkedIn.
