Best Siding Contractors in Middle Georgia: Who You Should Actually Compare

Thomas Williams, All American Renovations – Elite member of James Hardie™ ALLIANCE · Middle Georgia and Metro Atlanta

Who are the best siding contractors in Middle Georgia? I wrote this same post for Metro Atlanta and named five companies. I can’t do that here, and I’d rather tell you why than pad a list.

The Honest Answer About The Best Siding Contractors In Middle Georgia

There is not a deep bench of James Hardie™ ALLIANCE members between Atlanta and Macon.

That’s it. That’s the finding. There are plenty of contractors in this area, plenty of good tradespeople, plenty of people who will hang siding on your house next week. What there isn’t is a long list of companies who have voluntarily signed up to a manufacturer’s standard for the product you’re probably buying.

I’m not going to turn that into a sales pitch, because it isn’t one. It’s a problem for you. A thin field means your bids won’t cluster, and when bids don’t cluster you end up comparing numbers that describe completely different jobs. Why we’re not the lowest bid explains what that gap actually buys.

So this post does two things instead of handing you five names. It gives you the one company I’d genuinely send you to, and it shows you how to build your own comparable set in about ten minutes, without taking my word for any of it.

I Didn’t Want You To Just Take My Word For That

So I asked my James Hardie rep a question I’d suggest asking any manufacturer rep you get the chance to: if we weren’t a contractor, and you didn’t know us, who would you send to Middle Georgia?

His list was short. Short enough that I’m not going to pad this post to make the field look deeper than it is.

That’s a rep whose job is knowing every contractor in his territory. I’d rather show you that than just assert it.

Who I’d Actually Name

Rooftastic and Beyond, Peachtree City, Newnan and Tyrone. They’re on the I-85 side and they come south, which is why they’re in this post and not only in the Metro Atlanta one.

They install Hardie® siding well and they take care of their customers. They do roofing, siding and painting, so they’re a real alternative on a whole-exterior job, not just one trade. Formerly PGRS, Professional Gutter Roofing and Siding, they rebranded in the last couple of years. They’re also excellent at marketing, which is a genuine skill and not a knock.

Full disclosure: my business partner Pete is my brother, and he went to high school with their owner. Factor that into how much weight you give my read on them. I’d rather you discount it than find out later.

And that’s the list.

There were other names on my rep’s list. I’m only passing on the ones I’d actually send you to, which is one. I’m not going to run down a competitor in print. That’s not a fight worth having, and you shouldn’t trust anybody who does it. But I’m also not going to recommend a company I wouldn’t hand my own neighbor to, just to make this page look more generous than I feel.

One name, honestly held, beats four I’d be hedging about.

Build Your Own Comparable Set In Ten Minutes

Here’s the part that doesn’t require trusting me at all.

Go to James Hardie’s contractor locator and put in your own ZIP code. Not mine, not Macon’s if you’re in Monticello. Yours. Then widen the radius until you’ve got three or four companies.

Whatever that search returns is your real comparable set, and it will tell you more about your local market than this post can, because it’s current and this page won’t be forever. I’m not printing a list of who’s on it today, because that list changes and a page like this one stays up for years.

What to do with the result:

  • If you get three or four nearby, good. Call all of them. Your bids will cluster and your decision gets to be about fit.
  • If you have to widen the radius a long way to find three, which is what I expect for a lot of Middle Georgia ZIPs, that’s useful information too. It means the comparable bid you need may come from a company based an hour away, and the question to ask each one is simply whether they service your address.
  • If a contractor sitting at your kitchen table isn’t on it, that’s not automatically a no. It’s a question. Ask them what standards they’ve taken on that nobody required of them. What “licensed and insured” actually means goes through what the answers are worth in a state with no siding license at all.

The Five Questions That Sort Any List, Including Me

Use the same yardstick on all of us. These are the fundamentals, not trick questions, and a contractor who can’t answer them on your porch won’t do better on your wall.

  • What’s the required clearance between siding and a roof or slab? The manual prints one to two inches. Ask why it’s a range. The answer is the climate zone, and Georgia sits at the one-inch end.
  • What’s the required ground clearance? Six inches minimum, siding and trim to dirt. Then ask what they do when a house doesn’t have it, because plenty don’t. This is the one you can check yourself. Walk your own perimeter before anybody shows up.
  • Are the nails landing in studs, and do board joints land on a stud?
  • Are you flashing the joints, or caulking them?
  • Where does kick-out flashing go, and why?

And the two that end the conversation: will they show you certificates of workers comp and general liability, and is their plan to tear the old siding off or cover it over? If the answer to the second one is cover it, stop there. I’ve torn off more multi-layer houses than I can count and there was rot behind nearly all of them.

More of these, with the reasoning behind each, in the Metro Atlanta version of this post.

When I’d Tell You To Call Somebody Else

When we can’t do what you need.

We typically run four to six weeks out, sometimes six to eight. If your siding has to be done in two or three weeks, we are not equipped to do that well, and I’d rather say so than squeeze you in badly.

When that happens in Middle Georgia, I’d tell you to call Rooftastic and Beyond. Of the best siding contractors in Middle Georgia I know first-hand, they’re the one I’d hand you to.

That’s not a courtesy line. That’s who I’d actually name, and I named them above with the conflict attached.

What I’d Tell You If You Called Me

  • Run the locator on your own ZIP before you take any bid seriously. Ten minutes, and it’s the only step in this that doesn’t involve a contractor’s opinion.
  • Walk your own perimeter and look at the ground clearance. You’ll know something about your house that most of the people bidding on it haven’t checked yet.
  • Get three or four bids, and make them comparable. Four companies building to the same standard tells you what the work costs. Three of those plus one guy with a truck tells you nothing.
  • Ask every one of us for proof of insurance and watch what happens next.
  • Then pick the one you’re most comfortable with. Once the bids cluster, that’s the only variable left, and it’s the right one.

If you want to know what the work should cost before the bids come in, start with siding cost in Middle Georgia, and when they arrive, read estimate or proposal? before you compare them.

Gathering Siding Bids In Middle Georgia?

If you’re in Middle Georgia and gathering bids, we’d like to be one of them. And if we’re not the right fit, I’ll say so and point you at somebody who is. We’re in Hampton, with a design center in Forsyth, and we work across Middle Georgia and Metro Atlanta.

Live in or around Atlanta? Start with our siding contractor page for Atlanta, which lays out real Metro Atlanta prices.

Scroll to Top